PA66 Polyamide Granules Reinforced by 25% Fiberglass for Thermal Break Strip Extrusion

Product Description:
Glass fiber reinforced PA 6.6 granules with heat aging resistance extrusion moulding grade. It's good raw material for thermal break profiles of high stiffness and dimensional stability.
-PA66GF25 granules are reinforced by fiberglass. The final product performance of this raw material can meet the national standard.
-TPA66GF25 granules are based on PA66 resin. Then the granules are formed by twin-screw extrusion machine after adding fiberglass, efficient flame retardants and various additives.
Product Description:
Polyamide 6.6 granules reinforced by fiberglass, with special additives, is blended and extruded by twin screw extrusion machine. It is more suitable for extrusion of heat insulation strip. Compared with ordinary granules, it is more conducive to forming. It has certain advantages in speed, surface finish and yield. The performances of nylon insulating strip produced made of this material meet the national standards. It can not only be customized according to customer requirements, far exceeding the national standard, but also can add high-efficiency flame retardant to achieve the purpose of flame retardant. 
Introduction of Our PA66GF25 Granules:
Our PA66GF25 granules is special material for heat insulation profiles. It's extrusion grade modified plastics. It is different from PA66 resin. 
Our PA66GF25 granules is reinforced by 25% glass fiber. 

Introduction of Raw Material:
PA has the advantages of high mechanical strength, high softening point, good wear resistance, self-lubrication, cushioning, sound deadening, excellent oil and chemical corrosion resistance, and good electrical insulation. Because of these superior performance, PA composite have already replaced some metals being as structural materials.
Product Introduction:
-PA66GF25 granules are reinforced by fiberglass. The final product performance of this raw material can meet the national standard.
-PA66GF25 granules are based on PA66 resin. Then the granules are formed by twin-screw extrusion machine after adding fiberglass, efficient flame retardants and various additives.
What is PA 66 GF25?
PA66 GF25 is a 25 % glass fibre reinforced PA 66. It demonstrates outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability.
What is PA 66 25% GF?
PA 66 for injection moulding and extrusion moulding, chemically reinforced with 25 % glass fibre, heat stabilized, suitable for high strength and high impacted mouldings. Used in automotive, engineering, electrical, windows and doors industry. Can be used in environment, in which longtime heat impact of up to 200°C occurs.
What is Polyamide 66 GF25?
Polyamide 66 GF25, dry impact resistent (PA 66), used for a variety of applications for thermal insulation in aluminum windows, doors and facade systems, polyamide (PA) offers good insulating properties and excellent mechanical performance
Reinforced with glass fibers, the special PA 66 GF25, dry impact resistant mixture offers the best solution for aluminum systems for optimum results
High precision processing
Unlimited availability and recyclability
Is PA66 same as nylon 66?
While, Polyamide 66 (PA66) or Nylon 66 is one of the most popular engineering thermoplastics and is majorly used as a replacement to metal in various applications. Nylon 66 is synthesized by polycondensation of hexamethylenediamine and adipic acid (two monomers each containing 6 carbon atoms).

PA66 Features
1. It has excellent mechanical properties, high strength, high toughness.
2. The material has excellent coloring ability, can achieve various requirements of color matching
3. The shrinkage rate of PA66 is between 1% and 2%. The addition of glass fiber additives can reduce the shrinkage rate to 0.2%~1%. The shrinkage ratio is large in the flow direction and in the direction perpendicular to the flow direction.
4. PA66 is resistant to many solvents, but is less resistant to acids and other chlorinating agents.
5. PA66 excellent flame retardant performance, by adding different flame retardants can achieve different levels of flame retardant effect.

What is GF in plastic material?
Glass-filled nylon is a synthetic polyamide thermoplastic and it's one of the most important materials used in engineering thanks to its strength and heat resistance. It's made by adding powdered glass to nylon resin or by extruding the plastic with glass fibers.
What is raw material for polyamide thermal break strips?
Polyamides are among the most important and proven technical thermoplastics, known for their heat resistance, stiffness and high mechanical stability.
Polyamides can be classified into different types, with PA 6, PA 6.6 and PA 12 most established on the market. Alongside ABS and PP compounds they are among the most widely used plastics, found across several sectors including the automotive, mechanical engineering, structural and installation engineering, photovoltaics and electrical engineering industries. 
Glass fiber is a material consisting of numerous extremely fine fibers of glass. 
Glass fibres are used as reinforcement of polymers in various fields such as aerospace, automobile, marine, sporting and leisure goods, and construction and civil engineering. One of the principal advantages of using glass fibres for reinforcement of polymers is their high performance per cost ratio.
Our company use PA 6.6 and glass fiber to produce PA66GF25 granules, which is the most suitable raw material for polyamide thermal break strips production. 

Why use polyamide to produce thermal break profiles? / Advantages
Polyamides offer high levels of heat resistance, stiffness and high mechanical stability for a durable solution. Our special glass fiber reinforced PA 66 GF25, dry impact resistant mixture is ideal for the production of structural and reinforcement profiles.
Offering excellent heat resistance, polyamides can be used in the toughest of conditions, for example exposure to hot and humid environments. PA profiles can drastically reduce the Utj (U-Value of a thermal joint), which insulates the energy flow from the outside of the facade to the inside.
The uncomplicated processing of polyamides is another key benefit. With various properties that can be individually adapted according to the specific project and need, polyamides are the perfect choice for the manufacture of special extrusion profiles.

Advantages of our PA6.6-gf25 granules:
Our company has devoted more than ten years to the research and development and production of nylon extruding profiles. According to customer reaction, using our PA66 granules for production can get high yield, easy start-up, and get less scrap in the early start-up stage. There will be no lack or incomplete of profiles in the production process, thus avoiding material waste, saving customer costs and improving production efficiency.

Advantages:
1. We are a trading company with our own factory
We are professionally manufacturer of special material for polyamide thermal break profiles with over 10 years experience.
2. Good service & Top quality
Most perfect equipment, capable&experienced designers and skilled workers, advanced roduction management experience and strict quality management standard.
3. Quality control 
Procedure is inspected and controlled before packing the goods. We ensure every piece of product shipped is good quality.
4. Customized Service
If your application requires something even more special, we will work with you to develop unique formulations to help you create products that will dazzle your customers!

Advantage:
1.High mechanical strength
2.High toughness
3.High softening point
4.Good wear resistance
5.Delf-lubrication
6.Long-term work at higher temperatures
7.It has high CTI value , excellent electrical insulation , low smoke and low toxicity characteristics.
About color:
The color of our PA66GF25 granules is black, but we also can customize according to customers’ requirements.
Application:
Specially used in thermal break strips, thermal bridge, heat insulation bar, etc.
Application:
Specially used in thermal break strips, heat insulation bar, thermal insulation profiles, thermal broken bridge window,etc.
Application:
The PA66 granules with fiber glass are mainly used in thermal break strips, which are used in aluminum windows and doors. 
Application:
The PA66 granules with fiber glass are mainly used in thermal break strips, which are used in aluminum windows and doors. Our granules have good fluidity thus guaranteeing your smooth production. The good raw material can reduce the rate of rejects, and can produce high quality strips.

Package and Delivery:

FAQ:
Q: About Sample
A: Sample is Free, but the express fee is collect. Customer can also choose their own cooperated courier company.  
Q: About MOQ
A: For the polyamide granules, MOQ is 1 ton. For the thermal break strips, MOQ is 5,000 meters.
Q: About Customizing Special Shape Of Polyamide Profiles And Its Period
A: You can customize the special shape of polyamide strips. If we didn't meet this shape before, we will make new mold for you, and customer needs to pay for the mold.
Q: About Customizing Package Style and Marks
A: You can customize the package style and marks.
Q: Why your price is higher/lower than others?
A: For years specializing in polyamide granules and thermal break strips has bestowed us experienced and skilled technical workers and production workers. We promise the stability of products and the high-quality of raw material. Furthermore, we can provide technical support from raw material to the final appliance. 
Q: About warranty
A: 1 year. We are confident in our products, and pack them well before delivery, so usually you will receive your order in good condition. Any quality issue, we will deal with it immediately.
Q: About Payment or other question
A: 50% T/T deposit before production, 50% T/T balance before loading.

Product Performance

1. Sample water content less than 0.2% by weight.
2. Norm laboratory condition:(23±2)ºC and (50±10)% relative humidity.
3. The specifications marked with "a" only applies to I-shape strip otherwise, the specifications concluded between supplier and buyer through consultation, shall be written in contract or purchase order.