PaoloThank you very much for very good news! I understand the complication you had, no problem, we appreciate your honesty and collaboration. You have supplied good dies, all sizes within tolerance. We have ordered dies for a total amount of more than 200,000 USD and we are continuing to order. Thank you again to you and your very professional team.
RobinThe polyamide strips are working perfectly. Thanks a lot.
BrianHello, finally we will receive the container by tomorrow. Special thanks for your hard work and especially my CEO mentioned you and appreciated your work. Thank you again.
Plastic Polyamide Nylon 66 High Temperature Resisted For Extruding Profiles
|Color||Black||Material||Polyamide Nylon PA66 Resin|
|Type||Glass Fiber Reinforced Plastic Granules||Form||Polyamide 66 Resin Pellet|
|Fiber Type||Glass Fiber Reinforced Plastic||Specification||25kg/bag|
|Tensile Strength(longitudinal)||≥80mpa||Application||Nylon Extruding Profiles, Nylon Thermal Break Extruding Strips|
Plastic Polyamide Nylon 66,
Polyamide Nylon 66 High Temperature Resisted,
Glass Fiber Polyamide Nylon 66
Customized High Temperature Resisted Plastic Polyamide PA66 For Nylon Extruding Profiles
Nylon/PA66 granules are mainly used for nylon extruding profiles and nylon thermal break extruding strips. The granules produced by our company are special materials for nylon extruding profiles. There are different formulations for different shapes and complexities to ensure the smooth production of nylon profiles. It can not onyl be customized according to customer requirements, far exceeding the national standard, but also can add high-efficiency flame retardant to achieve the purpose of flame retardant.
Polywell PA66 Granules Performance Table
|NO.||Item||Unit||GB/T 23615.1-2009||pw-Technical specification|
|2||Linear expansion coefficient||K-1||(2.3-3.5)*10-5||(2.3-3.5)*10-5|
|3||Vicat softening temperature||ºC||≥230ºC||≥233ºC|
|5||Testing for tensile cracks||-||No cracks||No cracks|
|10||Elongation at break||%||≥2.5||≥2.6|
|12||High temperature tensile strength(transverse)||MPa||≥45a||≥47a|
|13||Low temperature tensile strength(transverse)||MPa||≥80a||≥81a|
|14||Water resistance tensile strength(transverse)||MPa||≥35a||≥35a|
|15||Aging resistance tensile strength(transverse)||MPa||≥50a||≥50a|
1. Sample water content less than 0.2% by weight.
2. Norm laboratory condition:(23±2)ºC and (50±10)% relative humidity.
3. The specifications marked with "a" only applies to I-shape strip otherwise, the specifications concluded between supplier and buyer through consultation, shall be written in contract or purchase order.
1. Competitive price, free samples, short delivery period.
2. Low smoke and other characteristics.
3. Good wear resistance,self-lubrication,long-term work at high temperature.
4. High CTI value,excellent electrical insulation.
5. Fast crystallization,fast forming,high temperature resistance.
6. Anti-ultraviolet radiation,anti-chemical agent corrosion.
7. High yield,easy start-up,and get less scrap in the early start-up stage.
8. No lack or incomplete of profiles in the production process.
9. There are different formulations for different shapes.
It is mainly used for nylon extruding profiles and nylon thermal break extruding strips. The granules produced by our company are special materials for nylon extruding profiles.There are different formulations for different shapes and complexities to ensure the smooth production of nylon profiles.
High strength, high rigidity, good heat resistance, low water absorption, low shrinkage, self-lubricating properties, and good processing properties. Among them, there is no floating fiber reinforced nylon 6 grade, and the surface gloss is good. Available in white and black, depending on the user's color requirements, you can negotiate custom other Our materials are vacuum dried. Then it is sealed and packaged and shipped to you. Therefore, if the thick PE film used for vacuum packaging is not damaged, it can be used directly.
PA (nylon) materials must be properly dried in order to provide parts with optimum strength and toughness. Nylon materials are hygroscopic and will become degraded by excessive moisture during the injection molding process. Product is supplied in moisture-protected containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient, but final moisture content must be less than 0.2%
Details of related standard:
- GB/T 23615.1-2009 Accessorial material for architectural aluminum alloy profiles -- Part 1: Thermal barrier strip of polyamide
- EN 14024-2004 Metal profiles with thermal barrier -- Mechanical performance Requirement, proof and tests for assessment
- YS/T 437-2008 Aluminium profiles moment of inertia calculation methods and computing software requirements
- JG/T 174-2005 Thermal barrier strips for construction industry
- GB 5237.6 -2012 Wrought aluminium alloy extruded profiles for architecture -- Part 6: Thermal barrier profiles
- GB/T 8478-2008 Aluminium windows and doors
- GB/T 8484-2008 Graduation and test for thermal insulating properties of doors and windows
- JG 175-2011 Insulating aluminum alloy profiles with thermal barrier for buildings
Zhangjiagang Polywell Engineering Plastics Company is located in the city of Zhangjiagang, Jiangsu Province, China. Our company has devoted more than ten years to the research and development and production of nylon extruding profiles. According to customer reaction, using our PA66 granules for production can get high yiedl, easy start-up, and get less scrap in the early start-up stage. There will be no lack or incomplete of profiles in the production process, thus avoiding material waste.
Packaging & Delivery:
Delivery details: shipped in 5-10 working days after receiving the payment
Pleass feel free to contact us if you have any questions.
Address:Jinfeng Town, Zhangjiagang City, Jiangsu Province, China